Features

Aesthetic Design

• Smooth contoured lines
• Slim profile

Easy Programming

• 10 programmable display points (e.g. inputs, outputs, or variables)
• Up to 7 points can be displayed on the screen at once
• Values can be programmed for adjustment by the user, or for display only
• Point 1 and any one of the 10 SS-L points can be configured to display on the home screen simultaneously
• Dedicated LCD icons for the display of: Auto, Manual, Cool, Heat, Fan, and Fan Speed

Large Liquid Crystal Display

• Displays time, analog, or digital values
• Optionally configured to blank its display after 10 seconds of idle time

Connection & Addressing

• Configure network address of SS-L using front buttons in address tool mode
• Valid addresses are 1-16
• Easy 4 or 6 wire connection
  (six wire required for use with X-Port-2™)

Built-in Configuration Tools

• User enabled configuration tools allow an operator to conveniently view and adjust setup parameters of SS-L and host controller

Network Access

• An RJ-11 connector on the bottom provides access to the host network (X-Port-2 required)

Optional Backlight

• LED lights up LCD screen while buttons are in use, then turns off after 10 seconds of inactivity

Optional CO2

• 0-2000 ppm ±50 ppm NDIR sensor

Optional °C/°F switch

• Change temperature display units instantly

Optional Humidity

• Accurate onboard humidity sensor

Optional I/O

• Up to 2 thermistor or dry contact inputs, and up to 2 digital TRIAC outputs

Optional Occupancy

• Extremely compact sensor, ideal for detecting the motion of a person up to 5 m (16 ft.) away

Warranty

• 5 years
• 1 year for humidity sensor and CO2 sensor

Certification

• FCC CFR 47 Part 15/B

Supply Voltages (from controller)

• SS-L - 5 VDC @ 5 mA
• -IO option adds 10 mA
• -CO2 option adds 2 mA
• -BL option adds 10 mA
• -OC option adds 0.2 mA

Display

• Four 16 mm (5/8") digits, six 8 mm (5/16") characters
• Six icons: Auto, Manual, Cool, Heat, Fan, and Fan Speed
• Display area 36 mm x 36 mm (1 3/8" x 1 3/8")

Temperature Specifications

• 12-bit A/D converter
• Range: 0 °C to 40 °C (32 °F to 104 °F)
• ±0.1 °C (0.18 °F) resolution
• User calibrated to ±0.1 °C (0.18 °F) accuracy

Backlight (for -BL models)

• LED backlight (10mA)

CO2 Sensor (for -CO2 models)

• Non Dispersive Infrared Optical sensor
• 0-2000 ppm range
• Accuracy ±50 ppm
• Automatic calibration built in
• Non Linearity < 1% of full scale
• Power: adds 2 mA to the base SS-L

Degree °C/°F switch (for -D models)

• Toggles LCD units between °C and °F

Humidity Range (for -H models)

• 0.1% display resolution
• 10-90% range
• ±1.8% RH accuracy

Inputs

• Dedicated temperature sensor
• 2 thermistor or dry contact (on -IO models)

Outputs (for -IO models)

• 2 binary TRIAC
• 24 VAC @ 0.5 A

Occupancy Sensor (for -OC models)

• Passive Infrared Radiation (PIR) sensor
• 64 detection zones
• 100° horizontal range / 82° vertical range
• 5 m (16.4 ft.) max. detection distance

Buttons

• 3 custom silicone rubber buttons
• Button functions: select, plus, and minus

Wiring Terminals

• 14 to 26AWG (2.08 mm² to 0.13 mm²)
• Stranded or solid core
• Copper conductors only

Dimensions

• Base Model:
  12 cm L x 7.0 cm W x 2.4 cm H
  (4 3/4" L x 2 3/4" W x 15/16" H)
• CO2 Model:
  12 cm L x 7.0 cm W x 3.2 cm H
  (4 3/4" L x 2 3/4" W x 1 1/4" H)

Weight

• 0.1 kg (0.22 lb.)

Ambient Limits

• Operating: 0 °C to 40 °C (32 °F to 104 °F)
• Shipping: -40 °C to 60 °C (-40 °F to 140 °F)
• Humidity: 10% to 90% RH non-condensing

SMART-Net™ eXpansion Board
The Reliable Controls SSX SMART-Net expansion board is used to maximize the number of SMART-Sensors and the combined SMART-Net cable length connected to a host controller.